Brother SA178 Side Cutter for 5mm PE Series

Out of stock


Achieve clean-cut edges as machine sews or performs satin stitches.

Creates the perfect cut edge like a serger or overlock.

Selecting a stitch designated for the Side Cutter allows you to create a beautiful finish without any adjustment on stitch settings.

1. Make a cut about 2 cm (3/4’’) long in the seam line of the fabric.
2. Select a stitch, and adjust settings as needed.
3. Place the cut right section on the top of the foot guide plate.
4. Slip the left side under the presser foot.
5. Lower the presser foot and guide the fabric through the presser foot as it stitches.

For Use With Brother sewing machine models: NX-400Q, PE-300S, PE-400D, PE-400D

Brother part number SA178

More Information
UPC 012502606734
Part Number SA178
Manufacturer's Suggested Retail Price $0.00
Copyright © Ken's Sewing Center. All rights reserved.