Brother 2340CV Foot Kit - 6 Piece
$699.00
In stock
Only 3 left
SKU
30884
The Brother 2340CV Foot Kit comes with all the optional feet available for the Brother 2340CV serger. Purchase the Brother 2340CV Foot Kit from Ken's Sewing Center and receive free shipping. This kit includes Brother accessories SA221, SA222, SA223, SA224, SA225, and SA226.
Brother SA221CV Hemming Set - Serge and finish hem edges with sized tools for consistent and professional finish.
- Set up your machine for a cover stitch, with the LC1 presser foot included in the machine.
- Attach the hem positioning plate A/B to the hemming attachment, and attach it to your machine.
- Fold fabric and set it into the guide.
- Sew.
Brother SA222CV Bias Tape Holder - Control fabrics while you serge and turn fabric edges for perfect bias binding with sized tools for consistent and professional finish. Folds and attaches 12 or 12.7 mm (1/2 inch) wide bias tape. You can use either self-made or store-bought bias tape.
- Set up your machine for 6 mm (approx. 1/4”) wide two needles, three threads stitch.
- Attach LC1 presser foot included in the machine.
- Insert the bias tape into the bias tape folder attachment.
- Sew.
Brother SA223 Belt Loop - Turn fabric strips into professinoally finished, serged belt loops. Use this guide to make belt loops or straps of 11 mm (1/2 inch) wide.
- Set up your machine for 6 mm (approx. 1/4”) wide two needles, three threads stitch.
- Attach LC1 presser foot included in the machine.
- Insert the tab on the belt-loop-sewing attachment into the front cover slot.
- Make 25 mm (1”) a fabric strap, and press 6 mm (approx. 1/4”) of one side (lengthways).
- Insert the fabric strap into the tape guide of the Belt Loop Guide.
- Sew.
Brother SA224CV Bias Tape Binding Set - Serge and turn fabric edges for perfect bias binding with sized tools for consistent and professional finish. Attaching 6 mm (approx. 1/4”) bias tape: Use the small bias tape sliding plate with the LC2 presser foot. Attaching 12 mm (approx. 1/2”) bias tape:Use the large bias tape sliding plate with the LC1 presser foot (included with your Cover
Stitch).
- Set up your machine for a chain stitch, the center needle.
- Insert the tab on the bias tape attachment into the front cover slot.
- Set the bias tape though the holder (cut the end of fabric pointed so that it is easily set through the holder).
- Sew as holding the fabric lightly with a tweezers.
Brother SA225CV Double Fold Binder - Serge and turn fabric edges for perfect bias binding with sized tools for consistent and professional finish. Attaches 12 mm (approx. 1/2 inch) wide fabric tape as making it by folding 40 or 42 mm (approx. 1-1/2 inches) wide fabric.
- Prepare a 40/42 mm (approx. 1-1/2”) wide fabric tape.
- Attach TB presser foot included in the machine.
- Set the fabric tape through the folding binder, and set it under the presser foot.
- Pull the fabric tape behind the presser foot.
- Sew.
Brother SA226CV Top Stitching Foot Set - A cover stitch serger creates perfectly spaced top stitching for a professional finish. Use included presser foot to top stitch with 3 or 6 mm (approx. 1/8 or 1/4 inch) wide cover stitch.
- Set T1/T2 presser foot.
- Set up your machine for a cover stitch, with 3 or 6 mm wide.
- Open the seams.
- Align the fabric joint and the groove of the presser foot, and sew.
| SKU | 30884 |
|---|---|
| Part Number | KSC-30884 |
| Condition | New |
| Minimum Advertised Price | $0.00 |