Janome MB7 Commercial Embroidery Machine Recent Trade
Save big on the Janome MB-7 Commercial Embroidery Machine, the first home use 7 needle embroidery machine. Ordering your new Janome MB-7 Commercial Embroidery Machine from Ken's is easy and our customer service department is always ready to answer your questions. With the Janome MB-7 Commercial Embroidery Machines seven needle system you can set up your embroidery then, move on to other projects while it embroiders. This Janome MB-7 Commercial Embroidery Machine is a recent trade taken is March of 2023. Though it has been used it is in good condition. Ken's techs have serviced it an all is well with it. The machine has small signs of use that does not affect how it embroiders.
- 10 fonts for monogramming.
- Large 5.7" Remote Computer Screen
- Extra Large Bobbin - 1.4 times larger than a regular bobbin
- 6 White LED lamps over needle area
- Stitch counter.
- 50 built in designs.
- Auto thread cutter.
- USB port on MB-7.
- Zoom in and out.
- Great task lighting.
- USB port (Host)on RCS.
- Ball bearing precision.
- Embroidery area tracing.
- USB memory key compatible.
- Multi language selection.
- Stitch out time indicator.
- Compatible with Janome software.
- Embroidery speed up to 800 spm.
- 2 and 3 letter monogramming.
- Expanded built In memory.
- Manual thread tension control.
- Built to work with most embroidery formats.
- Flip vertically and horizontally.
- One RCS can power multiple machines.
- Upper thread and presser foot sensors.
- 3 MB-7 hoops (included) snap in and out easily.
- Drag and drop editing for easy placement.
- Embroidery design resizable 80% - 120% by 1%.
- Dedicated Bobbin Winding Motor, winds while you sew.
- Fully compatible with industry-standard Tajima hoops.
- MY SET screen controls for Contrast, IN/CM, Designation.
- Automatically cuts jump threads, even between letters.
- Rotate in 1 and 90 degree increments(Clockwise /Counter Clockwise).
- The RCS has total set up and editing control with up to 65,536 colors.
- Subcontrol device, allows you to use the MB-4 without the controller.
- MB-7S includes 3MB, storing up to 1,500,000 stitches or up to 100 designs.
- USB slave port allows you to connect directly to your PC with Digitizer MBX software.(sold separately)
- Reads .dst, .jef. .jef+
- M1: 9.4" x 7.88" (240mm x 200mm)
- M2: 5" x 4.3" (126mm x 110mm)
- M3: 50mm x 50mm
Accessories Included with the offer
- Bobbins
- Needles
- Needle Threader.
- Hoop M1 (240 x 200).
- Hoop M2 (126 x 110).
- Hoop M3 (50 x 50).
- Spool Pin
- Spool Rest
- Spool Standleer
- Screwdriver
- Power Supply Cable
- Copy Instruction Book
Ken's Sewing Center provides free support to the life you own this machine purchased from us.
| SKU | 65916 |
|---|---|
| Part Number | MB-7 |
| Condition | Used |
