Kangaroo and Joey II Three Drawer Sewing Cabinet in White
The Kangaroo and Joey II Three Drawer Sewing Cabinet can hop right into any sewing room and fit perfectly. This Kangaroo and Joey II Three Drawer Sewing Cabinet has a three position airlift that holds most sewing machines comfortably and moves effortlessly up and down. The wide room in front of the lift on the Kangaroo and Joey II Three Drawer Sewing Cabinet allows the sewer to sit comfortably in the correct center needle sewing position. The Kangaroo and Joey Three Drawer Sewing Cabinet comes with a quilt leaf on the back of the cabinet that folds up or down and will help to expand your work area preventing large quilts or large pieces of fabric from falling on the floor behind the cabinet. An adjustable shelf for machine storage and a large pull out drawer for all your notions round out the features of this Kangaroo and Joey II Three Drawer Sewing Cabinet. The Joey storage unit adds three drawers of storage space yet is small enough to store in the Kangaroo’s pouch.
- Closed: 55 5/8”w x 21”d x 29-1/2”t
- Open: 55 5/8"w x 40-1/2 "d x 29-1/2"t (quilt leaf out)
Joey II Dimensions
- 25 ¾” W x 16 ½” D x 24″ H
- Top two drawer dimensions:
- 22 ½ ” W x 13″ D x 2 ½” H
- Bottom drawer dimensions:
- 22 ½ ” W x 13″ D x 8″ H
Supports machines up to 55 pounds
- 23 3/4" Wide
- 12 1/2 Deep
- 14 1/2" High
SEWING MACHINES THAT DO NOT FIT INTO THE KANGAROO II
We are aware of the following sewing machines that are too large to fit into the Kangaroo II sewing cabinet (K8805 Teak and K8811 Ash White):
- BabyLock – Destiny & Solaris
- Brother – Dream VX8500D & Luminaire Innov-is XP1
- Janome – Horizon Memory Craft 15,000
- Please note: The Janome Horizon Memory Craft 15,000 fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
- Elna – eXpressive 920
- Please note: The machine fits the platform of the cabinet in flatbed position (a custom insert is available) but you will have to move the sewing machine from right to left to lower into the storage position because of the extension of the front support leg of the machine. Also, the knee lifter lever cannot be used with a sewing cabinet due to the length of the lever and how machine sits on the platform in flatbed position.
- The Bernina 7 and newer Bernina 8 Series models 820 and 830 are approximately 1/4″ too tall to allow the cabinet to close up fully when the machine is in the down position.
Please be advised that this list may change as new models are introduced. It is extremely important to measure your machine prior to ordering to make sure it will fit.
Revised 03/05/2019
| SKU | 28484 |
|---|---|
| UPC | 650873881109 |
| Part Number | K8811 |
| Condition | New |