AlbaChem 1076 Embroidery Adhesive Spray
Use AlbaChem 1076 Embroidery Adhesive Spray for machine applique, quilting and embroidery. AlbaChem 1076 Embroidery Adhesive Spray is great for basting quilt layers in preparation for quilting. AlbaChem 1076 Embroidery Adhesive Spray holds stabilizing interface in place for machine embroidery. Repositionable, clear, non-staining, no methylene chloride. Albatross Embroidery Adhesive is a fine mist adhesive that is great for all embroidery applications. It will not stick to sewing machine needles. Provides a great temporary bond for applique. Expert Embroidery Spray Adhesive is a fast drying mist adhesive for use in all embroidery applications. It may be used to hold appliqués to fabric prior to sewing or embroidery. The unique formula is heat stable and will not decompose or stick to hot needles. It is clear in color and will not stain through fabrics.
• Provides permanent or temporary bonds.
• Dries instantly for fast applications.
• Has a long “open time” for repositioning.
• Does not contain any chlorinated solvents.
• Has a very low odor.
Directions for Use: Shake well before using. Make sure surfaces to be bonded are clean and dry. Hold can 6 to 8 inches from surface to be sprayed. Use a sweeping motion when spraying. For a temporary bond, spray Hold-Tight onto one of the surfaces to be bonding only. Allow a few seconds for product to dry before put-ting the surfaces together. For a permanent bond, spray Hold-Tight onto both surfaces that are being bonded. Immediately put the surfaces together, while the adhesive is still wet. To avoid clogging, after using, turn can upside down and spray against a piece of paper until a clean stream of air flows.