Baby Lock BLCS Coverstitch Serger Clear Foot

$17.99
In stock
SKU
65595

Baby Lock BLCS Clear Foot - Clear Foot (BLCS-CLF) This clear foot provides better visibility when attaching ribbon and lace, or guiding lightweight decorative serging. The raised guidelines on the foot ensure that you stitch with accuracy. This foot is perfect for decorative construction.

Use this foot for better visibility when attaching ribbon and lace,or guiding lightweight decorative stitching. The raised guidelines
on the foot ensure that you stitch with accuracy. This foot is perfect for decorative construction and the Baby Lock exclusive
Wave Stitch.


MACHINE SETTINGS
Any stitching application can be used (select one and check with
instruction book for length and width setting for specific stitch
selection).
1. Cut all threads to 4 inches (10 cm) in length.
2. Place fabric under the presser foot directly below the needles.
3. Lower the presser foot.
4. Turn the handwheel toward you to form 2 or 3 stitches.
5. Start to sew slowly.
6. After the first few stitches, stop and cut excess threads.
7. Start the next seam at the toe of the presser foot.
Note: You only need to raise and lower the presser foot when
working with thick fabrics or when precise positioning is required.
Be careful not to push or pull the fabric. The serger will feed it
evenly without help

Compatible with Babylock sewing machine models:
Cover Stitch BLCS, Cover Stitch BLCS-2

More Information
SKU 65595
UPC 098612258124
Part Number BLCS-CLF
Condition New
Copyright © Ken's Sewing Center. All rights reserved.