Juki Hinged Piping Foot Foot Left 3mm for TL Series
With this piping foot, the sewing machine is able to make piping cords with ease without using an iron and adhesive interlining. This piping foot can be widely used for sewing edges of bags and attaching decorative lines on knick knacks. There is slot that is approximately 3mm in diameter for passing a cord to the undersurface of piping foot on the left side of needle entry hole. This is a kind of “hinged foot", which has a spring at the rear
and the front part is raised. It is easy to go over the multi-layered portion.