Juki TL-18QVP Collectors Edition Sewing Machine

For a Limited Time receive a limited edition Sew Q Laser with your  Order of the Juki TL 18QVP Collector Edition Sewing Machine

The Juki TL-18QVP Collectors Edition Sewing Machine  is semi commercial straight stitch only machine. The Juki TL-18QVP Collectors Edition Sewing Machine  is built to last with several of optional accessories available to meet your sewing needs.  Feel free to check out the features below and let Ken's staff know if you have any questions about the Juki TL-18QVP Collectors Edition Sewing Machine .

Features of the Juki TL-18QVP Collectors Edition Sewing Machine 

• Automatic Needle Threader

  The automatic needle threader quickly and easily threads the needle without eyestrain, allowing you to change thread colors as often as you wish.

• Sub Tension Unit

  No matter the thread type, sub-tension ensures stitches are sewn with a balanced thread tension. Achieve Perfectly balanced threads with every stitch.

• Presser Foot Pressure Adjustment

  Turn the regulator on top of the machine to adjust the presser foot pressure according to the thickness of the fabric.

• Floating function (micro-lifter) Now equipped with the same mechanism as JUKI industrial sewing machines for preventing uneven sewing on quilts and velvet, as well as stretched stitches on knit fabrics. The presser foot floats 0 to 2mm above the material making it useful for sewing over thick seams. The height of the presser foot can be adjusted by turning the micro-lifter dial to allow the sewing machine to begin sewing with the presser foot slightly lifted (by approximately up to 2 mm). The floating function is used for sewing materials that are likely to cause uneven material feed. 

• Sturdy Die-Cast Aluminum Frame

  Machine body is made of a die-cast aluminum frame, minimizing vibration and noise. Professional performance is maintained by employing the same technology found in JUKI industrial sewing machines.

• Vertical Full Rotary Hook

  A vertical full rotary hook as in JUKI industrial sewing machines produces beautiful balanced and even stitching. Quiet smooth operation even at speeds up to 1,500 stitches per minute.

• Attachment Mounting Plate

  A separate attachment mounting plate for installing fabric guides and other attachments. This extends the life of the sewing machine, as it can now be replaced when the mounting holes become damaged.

• LED Sewing Light Brightness Adjustment Switch

  A switch in the needle area allows you to adjust the brightness of the light between high, medium, low and off. Adjust the brightness to make hard-to-see seams and stitching area easier to see.

• Needle Up/Down and Slow Motion Switch

  Each press of the needle up/down switch moves the needle halfway up or down. Hold the switch down to sew a slow single stitch ― useful when sewing corners and at the end of stitching.

• Drop Feed

  The feed dog can be raised and lowered by moving the lever. Perform free-motion quilting and free-hand embroidery with ease.

• Foot Controller with Thread Trimming Function

  Automatically trim thread by pressing the controller with your heel.

• Automatic thread trimming can be turned off by attaching a foot switch stopper

• Automatic Thread Trimmer

  Perfectly trim the needle and bobbin threads with the simple push of a button. Industrial sewing machine technology provides exceptional durability, noise control and cutting. Sewing can continue after automatic cutting even if the bobbin thread is not visible above the throat plate.

• Sewing Speed Control

  The sewing speed can be set between 200 and 1,500 stitches per minute when using the foot controller

• Easy Bobbin Replacement

  Bobbin replacement is a breeze even with the auxiliary table installed, thanks to a large bobbin case opening and a removable plate in the auxiliary table.

• Bobbin Case

  Open or close the bobbin case latch to allow the vertical bobbin case to be inserted into or removed from the machine with ease. This bobbin case also allows you to adjust the bobbin thread tension.

• Knee Lifter Lever

  The knee lifter lever allows you to lift/lower the presser foot without using your hands. The presser foot can be raised as high as 12 mm, making it easy to insert thick fabrics and large projects.

• Machine Threading

  The slit in the thread take-up makes threading extremely easy.

• Attachment Mounting Plate:

  A separate attachment mounting plate for installing fabric guides and other attachments. This extends the life of the sewing machine, as it can now be replaced when the mounting holes become damaged.

Specifications

Sewing Speed Min 55 - MAx 1,500 stitches per minute

Stitch length max 6mm

Lifr of the Presser Foot By lever MAx 10mm, by Knee Lift Max 12mm

Needle HA x 1 (130/705h)  OR HL x 5 Size 9 - 18

Weight 25.4 pounds

Light LED

Hook  vertical full rotary hook.